| |
| Omal Insert C Hinge Boring Machine - $899 |
-
INSERT C machine can be used for multiple drilling solution: Hinge insertion- Line drilling (base plates, shelf supports- Horizontal drilling (in line plates, K.D. fittings)
-
This machine is a 1,5 HP, 110 volt motor
-
5 spindles gearbox (boring pattern 45x9,5)
-
Center fence- Table (700 mm x 400 mm)
-
Right hand and left hand extension rulers (700 mm /2Õ4Ó each)
|
 |
 |
 |
|
| |
| Delta 2x Spindle Horizontal Boring Machine - $1500 |
-
Model 32-350
-
1 hp 115/230v single phase motor
-
requires 90psi of compressed air to operate
|
 |
 |
 |
 |
| |
Grass Eco-Press-P Hinge Boring - $750 |
- This is a hinge boring machine made by Grass
- Model is an eco-press-p.
- Powered by 110v, 2 Horse Power, Single phase motor on it
|
 |
 |
 |
 |
| |
| Conquest 2-46 Dual 23 Spindle Line Boring Machine - $6500 |
- Working table height = 37.5"
- Operating pressure of 80 - 100 psi
- Left & right pneumatic index pins
- 2 individually moveable pneumatic hold downs
- 132" fence capacity with 4 flip stops (Optional 44" extensions.) 32mm centers
- distance between first & last drill = 27.7"
- 2 TEFC Baldor motors, 3,450 rpm, 2 hp - 230 volt (5.8 amps) 60 Hz
- Each head accepts bits with 10mm shank, one flat side, 12 lefts & 11 rights
- maximum drilling depth of 60MM
- Frame size = 44" wide by 48" deep
- Machine weight = 1110 lbs
|
 |
 |
 |
 |
 |
| |
